5) Press asqw to adjust the item.
Items Operation Adjustment Adjustment range
[H]
Press the q button.
Left side will be
smaller.
-70 ~ +70
Press the w button.
Right side will be
smaller.
[V]
Press the a button.
Upper will be
smaller.
-70 ~ +70
Press the s button.
Lower will be
smaller.
Note
f Pressing the <ENTER> button while the individual adjustment screen is displayed can switch to the individual adjustment screen of other
items.
f Correction up to ±35° for the tilt in both vertical and horizontal direction is available for adjustments with [KEYSTONE]. However, the image
quality will degrade and it will get harder to focus with more correction. Install the projector so that the correction will be as small as possible.
Setting [CORNER CORRECTION]
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select [CORNER CORRECTION].
4) Press the <ENTER> button.
f The [CORNER CORRECTION] screen is displayed.
5) Press as to select the item to adjust. Then press the <ENTER> button.
f The individual adjustment screen of the selected item is displayed.
6) Press asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT] [UPPER RIGHT] [LOWER LEFT] [LOWER RIGHT]
Note
f When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next corner can also
be displayed by pressing the <ENTER> button.
f Depending on the correction amount, the image aspect ratio may change.
Setting [CURVED CORRECTION]
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
62 - ENGLISH
Chapter 4 Settings - [POSITION] menu
To Next Page
Loading...
