Panasonic PT-VZ570

2) Press qw or the <ENTER> button.
f The [RGB/YP
B
P
R
] or [RGB/YC
B
C
R
] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
The sync signal automatically selects the signal [RGB] / [YP
B
P
R
] / [YC
B
C
R
].
[RGB]
Select it for RGB signal input.
[YP
B
P
R
]
Select it for YP
B
P
R
signal input.
[YC
B
C
R
]
Select it for YC
B
C
R
signal input.
When the <COMPUTER 1 IN> / <COMPUTER 2 IN/1 OUT>
*1
terminal is selected
f For 525i(480i), 625i(576i), 525p(480p) and 625p(576p) input
Select [AUTO], [RGB] or [YC
B
C
R
].
f For other movie-based signal input
Select [AUTO], [RGB] or [YP
B
P
R
].
*1 When the <COMPUTER 2 IN/1 OUT> terminal is used as <COMPUTER 2 IN> terminal
When the <HDMI 1 IN> / <HDMI 2 IN> terminal is selected
f For 525p(480p) and 625p(576p) input
Select [AUTO], [RGB] or [YC
B
C
R
].
f For other movie-based signal input
Select [AUTO], [RGB] or [YP
B
P
R
].
Note
f Refer to “List of compatible signals” (Æ page 111) for the signal details.
f The signal selection may not function properly depending on connected devices.
Chapter 4 Settings - [PICTURE] menu
54 - ENGLISH