Panasonic PV-GS34 - Image Stabilizer Function; Backlight Compensation Function

31
Recording Mode
1/2
1/2
Image Stabilizer Function
If the Camcorder is shaken while recording, the
camera shake in the image can be corrected.
• If the Camcorder shakes too much, the images may
not be stabilized.
• Set to Tape Recording Mode.
1 Set [ ADVANCE] >> [ EIS] >> [ON].
• The [ ] Indication appears.
2 Press the Recording Start/Stop Button
31
or [PHOTO SHOT] Button
25
to start
recording.
 To Cancel Image Stabilizer Function
Set [ ADVANCE] >> [ EIS] >> [OFF].
• For other notes concerning this item, see page 67.
Fade In/Out Functions
35
30
SP 3h59m59s29f
0
:56AM
2 2005
31
25
• Set to Tape Recording Mode.
1 Set [ SETUP] >> [ FADE COLOR] >>
[BLACK] or [WHITE].
35
30
• Fade In :
The image and audio gradually appear.
• Fade Out :
The image and audio gradually disappear.
3 Move the Joystick Control [◄]
35
to select
[ ].
4 Press the Recording Start/Stop Button
31
.
35
31
• The [ W] or [ B] Indication flashes and then
is displayed.
Backlight Compensation Function
This prevents the subject from being recorded too
darkly when backlit. (Backlight is the light that shines
from behind the subject being recorded.)
• Set to Tape/Card Recording Mode.
1 Press the Joystick Control
35
to display
the One-Touch Navigation icon on the
lower right of the screen.
35
2 Press the Joystick Control
35
to display
the One-Touch Navigation icon on the
lower right of the screen.
[One-Touch Navigation icon]
35
 To Cancel Fading
Move the Joystick Control [◄] to select [ ] again.
Start recording. (Fade in)
When you start recording, the image/audio
disappeared completely and the image/audio
gradually appears.
Pause recording. (Fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording stops.
• For other notes concerning this item, see page 67.
[One-Touch Navigation icon]
[One-Touch Navigation icon]
1/2