Panasonic PV-GS34 - White Balance Adjustment; Manual White Balance Adjustment

34
Recording Mode
3/3
 To Resume Automatic Adjustment
Move the Joystick Control [◄] or [►]
35
until
the [ ] Indication appears. Or, set the [AUTO/
MANUAL/FOCUS] Switch to [AUTO].
3 Move the Joystick Control [◄] or [►]
35
until the [ ] Indication is displayed.
2 Move the Joystick Control [▼]
35
until the
white balance indication appears. ([ ]
etc.)
SP 3h59m59s29f
R2:00
►
12:34:56AM
JAN 2 2005
3/3
4 Point the Camcorder at a full-screen white
subject.
5 Move the Joystick Control [▲]
35
until the
[ ] Indication stops fl ashing.
35
SP 3h59m59s29f
R2:00
►
12:34:56AM
JAN 2 2005
3/3
1) Automatic White Balance Adjustment [ ]
2) Indoor Mode (recording under incandescent
lamp) [ ]
3) Outdoor Mode [ ]
4) The white balance setting that was previously
set manually [ ]
 To Resume Automatic Adjustment
Move the Joystick Control [◄] or [►]
35
until
the [ ] Indication appears. Or, set the [AUTO/
MANUAL/FOCUS] Switch to [AUTO].
Adjusting White Balance Manually
White Balance Adjustment recognizes the colour of
light and adjusts so that white will appear pure white.
The Camcorder determines the hue of light that comes
through the Lens and White Balance Sensor, thereby
judging the recording condition, and selects the
closest hue setting. This function is called Automatic
White Balance Adjustment.
For light outside the functional Auto White Balance
Adjustment range, use the Manual White Balance
Adjustment Mode.
• Set to Tape/Card Recording Mode.
26
• The [ ] Indication and the One-Touch
Navigation icon appears.
1 Set the [AUTO/MANUAL/FOCUS] Switch
26
to [MANUAL].
SP 3h59m59s29f
R2:00
►
12:34:56AM
JAN 2 2005
3/3
SP 3h59m59s29f
R2:00
►
12:34:56AM
JAN 2 2005
3/3
SP 3h59m59s29f
R2:00
►
12:34:56AM
JAN 2 2005
3/3
SP 3h59m59s29f
R2:00
►
12:34:56AM
JAN 2 2005
3/3
2 Move the Joystick Control [▼]
35
until the
white balance indication appears. ([ ]
etc.)
1) 2)
3)
4)
35
3 Move the Joystick Control [◄] or [►]
35
to
select a desired White Balance Mode.
SP 3h59m59s29f
R2:00
►
12:34:56AM
JAN 2 2005
3/3
[One-Touch Navigation icon]
3/3
Recording in Natural Colours
( White Balance)
Depending on the scene or lighting conditions, the
Automatic White Balance Adjustment Mode may not
be able to bring out natural colours. In this case, the
white balance can be adjusted manually.
When the Camcorder is turned on with the Lens Cap
on, the Automatic White Balance Adjustment may not
function properly. Please turn on the Camcorder after
removing the Lens Cap.
• Set to Tape/Card Recording Mode.
26
1 Set the [AUTO/MANUAL/FOCUS] Switch
26
to [MANUAL].
• The [ ] Indication and the One-Touch
Navigation icon appears.
[One-Touch Navigation icon]