Panasonic PV-GS34 - Page 43

43
Playback Mode
• For other notes concerning this item, see page 69.
 To Display the On-screen Information
on the TV
The information displayed on the LCD Monitor or
the Viewfinder (One-Touch Navigation icon, time
code and mode indication, etc.), date and time can
be displayed on the TV.
1 Press the [OSD] Button
42
on the Remote
Control. (PV-GS35 only)
• Press the button again to erase the OSD
information.
42
3 Turn on this Camcorder and set the Mode
Dial
34
to the Tape Playback Mode.
5 Move the Joystick Control
[▲]
35
to select the [ ] to
start playback.
• The image and audio are
output on the TV.
6 Move the Joystick Control
[▼]
35
to select the [ ] to stop playback.
 If the image or audio from this
Camcorder is not output on the TV
• Check that the plugs are inserted as far as they
go.
• Check the connected terminal.
• Check the TV’s input setting (input switch). (For
more information, please read the operating
instructions for the TV.)
4 Select the input channel on the TV.