18 Parts Location and Replacement Parts List
TOP PREVIOUS NEXT
Note:
● Important safety notice:
Components identified by
mark have special characteristics important for safety.
Furthermore, special parts which have purpose of fire-retardant (resistors), high-quality sound
(capacitors), low-noise (resistors), etc. are used.
When replacing any of these components, be sure to use only manufacturer’s specified parts
shown in the parts list.
● The parenthesized indications in the Remarks columns specify the areas or colour. (Refer to the
cover page for area or colour)
Parts without these indications can be used for all areas.
● Warning: This product uses a laser diode. Refer to caution statements on
ACHTUNG:
Die Lasereinhelt nicht zerlegen.
Die Lasereinhelt darf nur gegen eine vom Hertsteller spezifizierte Einheit ausgetauscht werden.
● Capacitor values are in microfarads (μF) unless specified otherwise, P=Pico-farads (pF),
F=Farads.
● Resistance value are in ohms, unless specified otherwise, 1K=1,000 (OHM).
● The marking (RTL) indicates that the Retention Time is limited for this item. After the
discontinuation of this assembly in production, the item will continue to be available for a
specific period of time. The retention periodof availability is dependent on the type of assembly,
and in accordance with the laws govening part and product retention. After the end of this period,
the assembly will no longer be available.
To Next Page
Loading...
