A DR COMP - Dynamic range compression
Change this setting to listen to software recorded with Dolby Digital at
low volume (such as late at night) and maintain audio clarity. It
reduces the peak level in loud scenes without affecting the sound
field.
OFF: The software is played with the original dynamic range (factory
setting).
STANDARD: The level recommended by the producer of the software
for household viewing.
MAX: The maximum allowable compression (recommended for night
viewing).
B D – INPUT - Digital input
You can change the digital input settings for DVD and TV to coaxial
input if necessary, for example, if your equipment doesn't have an
optical output terminal. Regardless of the settings one of the terminals
will not be used.
The factory settings are: TV: OPT 1
DVD: OPT 2
C A/D ATT - A/D attenuator
Turn the A/D attenuator on if “OVERFLOW” lights frequently when
using 2-channel analog input.
The factory setting is OFF.
1. Press [INPUT SELECTOR] and [BAND] at the
same time to enter the setting mode.
2. Press [INPUT SELECTOR] to select the item you
want to change.
3. Change the settings.
A DR COMP
Press [TUNE 2 or 1] to select “OFF”, “STANDARD” or “MAX”.
B D – INPUT
1 Press [BAND] to select “TV” or “DVD”.
2 Press [TUNE 2 or 1] to select “OPT 1”, “OPT 2” or “COAX”.
C A/D ATT
Press [TUNE 2 or 1] to select “OFF” or “ON”.
4. Press [INPUT SELECTOR] and [BAND] at the
same time to exit the setting mode.
Changing the settings
Setting descriptions
Other functions
Tone
Balance
You can adjust the level of the bass and treble.
1.Press [TONE] to select “BASS” or “TREBLE”.
2.Press [–/L] or [+/R] to adjust bass/treble.
For your reference
¡To adjust the tone
The STEREO mode must be on and input must be either analog or
PCM signals.
You can adjust the balance of the front speakers.
1.Press [BALANCE].
2.Press [–/L] or [+/R] to adjust.
Others
Input mode
This unit automatically detects whether input is digital or analog, but you
can fix the input mode.
Press [INPUT MODE] to select “AUTO”, “ANALOG”
or “DIGITAL”.
To Next Page
Loading...
