Panasonic SA-XR15 - Step 3 Settings; Speaker Size and Subwoofer Settings

8
RQT6964
Enter the setting mode.
1
POWER 8
INPUT MODE
STEREO/
2CH MIX
DOLBY
PRO LOGIC
SFC TEST
SLEEP
BALANCE
LEVEL EFFECT
TONE
– /L
+ /R
ENTER
^^
DISC
RECEIVER
AV SYSTEMRECEIVER
AUX
VCR
FM
CH
VOLUME
SKIP
– TV VOL +
TOP MENU
MENU
DIRECT
NAVIGATOR
DISPLAY
DIMMER
SUBWOOFER MUTINGTV/VIDEO
RETURN
PLAY
LIST
SLOW / SEARCH
DIRECT TUNING
AM
1
23
7
0
89
10
4
5
6
>
=
DVD TV
ENTER
g
h
uit y
q
TEST
LEVEL
– /L + /R
VOLUME
POWER 8 DTS FM MODE
INPUT SELECTOR
BAND
MEMORY VOLUME
PHONES DOWN UP
PRESET TUNE 2 TUNE 1
% DIGITAL % PL2
^
POWER 8
INPUT SELECTOR
BAND
TUNE 2 TUNE 1
Display
INPUT SELECTOR
BAND
INPUT SELECTOR
BAND
Press at the
same time
Select “SPEAKERS”.
SPEAKERS
Select the speaker.
Change the setting.
FRONT
FRONT, CENTER,
SURROUND, SUB-WFR
SMALL
NONE, SMALL, LARGE
NO, YES
INPUT SELECTOR
BAND
TUNE 2 TUNE 1
Exit the setting mode.
Press at the
same time
Repeat.
SPEAKERS
Settings
Step
1 2
3
4
Step 3
Change the settings to suit your equipment to the environment in which
you are using it. Before making any changes, read the descriptions of the
settings, note the factory settings and ranges, and refer to the
equipment’s instructions.
Switch on
Set the size to suit your speakers
LARGE: For speakers that can
reproduce a full sound range,
particularly the bass range
below 100 Hz.
SMALL: For speakers that cannot
adequately reproduce the bass
range. This setting is sufficient
for most speakers if you are
using a subwoofer.
NONE: For speakers you haven’t
connected (center or surround).
The factory settings are: SMALL
For the subwoofer (SUB-WFR), select
YES if you have connected one (factory
setting), or NO if you have not.