24
Step 8 : Detach 14P FFC at connector (CN941) on Bridge
P.C .B . .
Step 9 : Remove Front Panel Block.
8.10. Disassembly of Bridge P.C.B.
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove screw.
Step 2 : Release 5P wire from slot.
Step 3 : Detach 5P wire at connector (P942) on Bridge P.C.B..
Step 4 : Release catches.
Step 5 : Remove Bridge P.C.B..
To Next Page
Loading...
