34
8.19. Disassembly of SMPS Unit
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 5 screws.
Step 2 : Gently lift up 16P FFC.
Step 3 : Gently lift up to remove SMPS Unit.
8.20. Disassembly of SMPS P.C.B.
• Refer to “Disassembly of SMPS Unit”
Step 1 : Remove screw.
Step 2 : Release catch.
Step 3 : Remove AC Inlet Holder.
Caution : During assembling, ensure AC Inlet Holder is
fully catched to the SMPS Unit. A "click" sound will be
heard when fully catched.
Step 4 : Lift up Himelons.
Caution : Replace Himelons if they are torn during disas-
sembling.
To Next Page
Loading...
