43
8.29. Disassembly of Front Speaker
(SP2)
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of NFC P.C.B.”
• Refer to “Disassembly of SMPS Unit”
• Refer to “(Step 1) - (Step 3) of item 8.21.”
• Refer to “Disassembly of CD Mechanism”
• Refer to “(Step 1) - (Step 5) of item 8.25.” (For HC397)
• Refer to “Disassembly of Main P.C.B.”
Caution : When assembled Button Ornament Unit, ensure
it is seated properly and all button operations are working.
Step 1 : Remove Back Shield.
Step 2 : Release 2P wire from slots.
Step 3 : Remove 3 screws.
Step 4 : Remove Speaker Cabinet Unit (R) Block.
Step 5 : Desolder speaker wire at the terminals on Front
Speaker (SP2).
To Next Page
Loading...
