44
Step 6 : Remove 4 screws.
Step 7 : Remove Front Speaker (SP2).
8.30. Disassembly of Passive Radia-
tor Unit (SP3)
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of NFC P.C.B.”
• Refer to “(Step 1) - (Step 3) of item 8.21.”
• Refer to “Disassembly of CD Mechanism”
• Refer to “(Step 1) - (Step 4) of item 8.28.”
Caution : When assembled the Button Ornament Unit,
ensure it is seated properly and all button operations are
working.
Step 1 : Slightly lift up to remove Passive Radiator Unit (SP3).
Caution : During assembling, ensure Passive Radiator
Unit (SP3) is seated under the guides of cabinet as shown.
To Next Page
Loading...
