Panasonic SC-HC395EG

45
8.31. Disassembly of Passive Radia-
tor Unit (SP4)
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of NFC P.C.B.”
• Refer to “Disassembly of SMPS Unit”
• Refer to “(Step 1) - (Step 3) of item 8.21.”
• Refer to “Disassembly of CD Mechanism”
• Refer to “(Step 1) - (Step 5) of item 8.25.” (For HC397)
• Refer to “Disassembly of Main P.C.B.”
• Refer to “(Step 1) - (Step 4) of item 8.29.”
Caution : When assembled Button Ornament Unit, ensure
it is seated properly and all button operations are working.
Step 1 : Slightly lift up to remove Passive Radiator Unit (SP4).
Caution : During assembling, ensure Passive Radiator
Unit (SP4) is seated under guides of cabinet as shown.
8.32. Disassembly of Jack Lid
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of NFC P.C.B.”
• Refer to “Disassembly of SMPS Unit”
• Refer to “(Step 1) - (Step 3) of item 8.21.”
• Refer to “Disassembly of CD Mechanism”
• Refer to “(Step 1) - (Step 5) of item 8.25.” (For HC397)
• Refer to “Disassembly of Main P.C.B.”
Caution : When assembled Button Ornament Unit, ensure
it is seated properly and all button operations are working.
Step 1 : Release Jack Lid Spring as shown.
Step 2 : Release shaft of the Jack Lid inwards in order of
sequences (1) to (2) as shown.