31
8.16. Disassembly of Cam Rail Top &
Door Slider Top
• Refer to “Disassembly of Front Ornament Unit (L) & (R)”
• Refer to “Disassembly of Door Unit”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 2 screws.
Step 2 : Remove 2 screws.
Step 3 : Slightly lift up to remove Cam Rail Top.
Caution : During assembling, ensure Door Slider Bottom is
properly inserted into Cam Rail Bottom.
Step 4 : Remove Door Slider Top.
To Next Page
Loading...
