RQT6682
5
Before use
The remote control
A Battery installation
Use of batteries
• Align the poles (+ and –) properly when inserting the
batteries.
• Do not mix old and new batteries or different types of
batteries.
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble the batteries. Do not allow
them to contact flame or water.
• Remove the batteries if the unit is not to be used for a long
time.
• Do not keep together with metallic objects such as
necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can damage items the fluid contacts and may cause a
fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact
with any part of your body.
B Correct method of use
Operations notes
• Do not place obstacles between the remote control signal
sensor and remote control unit.
• Do not expose the remote control signal sensor to direct
sunlight or to the bright light of a fluorescent light.
• Take care to keep the remote control signal sensor and
end of the remote control unit free from dust.
• If this system is installed in a rack with glass doors, the
glass doors’ thickness or color might make it necessary to
use the remote control unit a shorter distance from the
system.
To prevent damage
• Do not place heavy items on the remote control.
• Do not disassemble or reconstruct.
• Do not spill water or other liquids on the remote control.
Placement of speakers
Speakers are designed identically so that no left or right
channel orientation is necessary.
Notes
• Keep your speakers at least 10 mm away from the system
for proper ventilation.
• These speakers do not have magnetic shielding. Do not
place them near televisions, personal computers or other
devices easily influenced by magnetism.
• To avoid damage to the speakers, do not touch the
speaker cones if you have taken the nets off.
C
A
C
B
Remote control
signal sensor
About 7 meters in
front of the signal
sensor.
Transmission
window
R6, AA, UM-3
RQT6682(2-10).P65 3/24/05, 11:59 AM5
To Next Page
Loading...
Need help?
Amplifier Section
