EasyManuals Logo

Panasonic SC-PM19 User Manual

Panasonic SC-PM19
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
RQT7369
Listening operations
Enjoying MP3
A Program play for MP3
You can program up to 24 tracks.
Preparation:
1.Press [DISC] and (within 10 seconds) [1]–[5] to select the disc.
2.Press [7 CLEAR].
1 Press [PROGRAM].
“PGM” appears.
2 Press [ALBUM ( or )] to select the album. To
select an album directly, press the numeric
buttons after pressing [ALBUM ( or )].
For two digit numbers, press [
h
10] once then the two digits.
For three digit numbers, press [
h
10] twice then the three digits.
3 Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] to select the
track. To select a track directly, press the numeric
buttons after pressing [
44
44
4/REW/4] or [
33
33
3/FF/¢].
4 Press [ENTER].
Repeat steps 2 to 4 to program other tracks.
5 Press [CD 3/8] to start play.
Play will start according to programmed sequence until the end.
To exit program mode.
Press [PROGRAM] in the stop mode. (You can replay
your program by pressing [PROGRAM] then [CD 3/8].)
You can do the following while “PGM” is displayed.
Notes
You can use repeat mode (\ page 14) with program play.
You cannot program more than one CD for MP3.
You cannot program CD-DA together with MP3 tracks.
The program memory is cleared when you change a disc or
open the CD tray.
B Album/Track title search
Preparation: Press [CD 3/8] and then [7 CLEAR].
1 For album title search, press [TITLE SEARCH]
once.
For track title search, press [TITLE SEARCH]
twice.
2 Enter the album/track title keyword.
(\ page 19)
3 Press [ENTER].
Press [
33
33
3/FF/¢] to display the next title search result.
“NOT FOUND” is displayed when there is no match.
4 Press [CD 3/8] to start play from the album/track
found.
Title search mode is cancelled.
To cancel partway through
Press [7 CLEAR].
A
1
2
2 3
5
4
4/REW/4,
3/FF/¢
DEL
DISC
7 CLEAR
1
PROGRAM
2 3
4
5
CD
6
B
1
4
2
3
3/FF/¢
7 CLEAR
1
2
3
4
CD
6
To
check program
contents
add to the program
clear the last track
clear all
programmed tracks
Action
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] when
“PGM” is displayed.
To check while programming, press
[PROGRAM] twice after “PGM” appears,
then press [
44
44
4/REW/4] or [
33
33
3/FF/¢].
Repeat steps 2~4.
Press [DEL] in the stop mode.
Press [7 CLEAR]. Within 5 seconds, press
the button again to clear all tracks.
“CLEAR ALL” is displayed.
4
/REW
3
/FF
RQT7369-1B_16-20_EN 26/2/04, 10:28 am18

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SC-PM19 and is the answer not in the manual?

Panasonic SC-PM19 Specifications

Amplifier Section IconAmplifier Section
RMS power output (Low channel)35 W per channel (6 Ω)
RMS power output (High channel)35 W per channel (6 Ω)
Total Bi-Amp power70 W per channel
Output impedance (Headphone)16Ω – 32Ω
FM Tuner Section IconFM Tuner Section
Frequency range87.50 MHz – 108.00 MHz
Sensitivity1.5 µV (IHF)
Antenna terminal(s)75 Ω (unbalanced)
AM Tuner Section IconAM Tuner Section
Frequency range (9 kHz steps)522 kHz – 1629 kHz
Frequency range (10 kHz steps)520 kHz – 1630 kHz
Sensitivity (at 999 kHz)560 µV/m
Cassette Deck Section IconCassette Deck Section
Track system4 track, 2 channel
Tape speed4.8 cm/s
Wow and flutter0.10% (WRMS)
CD Section IconCD Section
Sampling frequency44.1 kHz
Frequency response20 Hz – 20 kHz (+1dB, –2 dB)
Bit rate32 kbps – 320 kbps
Speaker Section IconSpeaker Section
Type2 way, 2 speaker system
Impedance6Ω
Dimensions (WxHxD)128 mm x 250 mm x 222 mm
General IconGeneral
Power supply (Continental Europe)AC 230 V, 50 Hz
Power supply (United Kingdom, Australia, New Zealand)AC 230 V – 240 V, 50 Hz
Power consumption130 W

Related product manuals