EasyManuals Logo

Panasonic SC-PM19 User Manual

Panasonic SC-PM19
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Listening operations
11
RQT7369
CDs
This unit can play CD-DA (digital audio) format audio CD-R
and CD-RW that have been finalized (a process performed after
recording that enables this unit to play audio CD-R and CD-
RW).
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
The unit contains five CD trays.
You can simply listen to the CD on a single tray, or you can
select and listen to the CD in a particular tray. See the section
on All-Disc play (\ page 13) for information on how to listen to
all the CDs one after another.
Listening to CD on a single tray
1 Press [0 OPEN/CLOSE] to insert the CD on the
disc tray. Press again to close.
2 Press [CD 3/8] to start play from the first track.
The player stops after playing the last track.
3 Adjust the volume.
A CD selection and care
Only play CDs with COMPACT disc DIGITAL AUDIO trademark.
(see
a
)
Do not;
Use irregularly shaped CDs. (
b
)
Attach extra labels and stickers.
Use discs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers. (
c
)
Attach scratch-proof covers or any other kind of accessory.
Write anything on the CD.
Clean CDs with liquids. (Wipe with a soft, dry cloth.)
Use CDs printed with label printer available on the market.
To prevent damage
Always observe the following points.
Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
Do not move the system while tray is opening/closing, or when
loaded. Always unload all CDs before moving the system.
Do not put anything except a CD in the tray.
Do not use cleaning CDs or CDs which are badly warped or
cracked.
Do not disconnect the power mains lead from the household
mains socket during CD changing operation.
To
stop the disc
pause play
skip tracks
search through
tracks
view CD indicator
start one touch play
Action
Press [STOP 7 ,DEMO].
Press [CD 3/8]. Press again to resume
play.
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢].
Press and hold [
44
44
4/REW/4] or [
33
33
3/FF/
¢] during play or pause.
The CD indicator on the display lights
whenever the tray is in the playing
position.
If the unit is in standby mode and a CD
is loaded, press [CD 3/8] or [CD 1] ~
[CD 5]. The unit will come on
automatically and play will start.
2
1
3
(CD 1) ~
(CD 5)
DEMO
STOP
,
4/REW/4,
3/FF/¢
1
0
OPEN/
CLOSE
2
CD 6
3
DOWN
VOLUME
UP
A
a
b
c
RQT7369-B_09-15_EN 15/1/04, 6:25 pm11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SC-PM19 and is the answer not in the manual?

Panasonic SC-PM19 Specifications

Amplifier Section IconAmplifier Section
RMS power output (Low channel)35 W per channel (6 Ω)
RMS power output (High channel)35 W per channel (6 Ω)
Total Bi-Amp power70 W per channel
Output impedance (Headphone)16Ω – 32Ω
FM Tuner Section IconFM Tuner Section
Frequency range87.50 MHz – 108.00 MHz
Sensitivity1.5 µV (IHF)
Antenna terminal(s)75 Ω (unbalanced)
AM Tuner Section IconAM Tuner Section
Frequency range (9 kHz steps)522 kHz – 1629 kHz
Frequency range (10 kHz steps)520 kHz – 1630 kHz
Sensitivity (at 999 kHz)560 µV/m
Cassette Deck Section IconCassette Deck Section
Track system4 track, 2 channel
Tape speed4.8 cm/s
Wow and flutter0.10% (WRMS)
CD Section IconCD Section
Sampling frequency44.1 kHz
Frequency response20 Hz – 20 kHz (+1dB, –2 dB)
Bit rate32 kbps – 320 kbps
Speaker Section IconSpeaker Section
Type2 way, 2 speaker system
Impedance6Ω
Dimensions (WxHxD)128 mm x 250 mm x 222 mm
General IconGeneral
Power supply (Continental Europe)AC 230 V, 50 Hz
Power supply (United Kingdom, Australia, New Zealand)AC 230 V – 240 V, 50 Hz
Power consumption130 W

Related product manuals