Recording operations
22
RQT7369
A Recording CDs
1 Press [CD 3/8] and then [STOP 7, –DEMO].
2 Press [PLAY MODE] to select your desired mode.
For 1-TRACK mode
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] to select the track.
For 1-ALBUM mode (MP3)
Press [ALBUM ( or )] to select the album.
For 1-DISC/1-RANDOM mode
Do steps 1 to 3 on page 13.
Ensure CD is stopped.
3 Press [¶/8 REC] to start recording.
To record programmed tracks
This function allows you to record up to 24 programmed tracks.
1 Program the track(s) you want.
(\ steps 1 - 6 on page 15)
2 Press [¶/8 REC] to start recording.
B Auto-off function
To save power, the unit turns off if it is left unused for 10 minutes.
This function works only if CD or tape is selected as the source.
This function does not work if the source is tuner or AUX.
Press [SHIFT] + [AUTO OFF].
“AUTO OFF” is shown on the display.
To cancel
Press [SHIFT] + [AUTO OFF] again to clear “AUTO OFF” from
the display.
For your reference
The setting is maintained even if the unit is turned off. When
the unit is turned on again, “AUTO OFF” is displayed and the
unit functions as described above.
“AUTO OFF” disappears from the display if either tuner or AUX
is selected as the source but continues to function normally.
To
stop recording
stop recording
temporarily
Action
Press [STOP 7, –DEMO].
Press [¶/8 REC].
If the tape finishes before the CD,
press [STOP 7, –DEMO] to stop the
CD.
Press [¶/8 REC] to resume
recording.
A
ALBUM
( , )
4
/REW/
4
,
3
/FF/
¢
2
1
3
1
CD
6
➞
STOP
7
2
PLAY MODE
3
¶
/
8
REC
B
AUTO OFF
SLEEP
SHIFT
SHIFT
AUTO OFF
SLEEP
Mode
1-DISC
ALL-DISC
1-TRACK
1-ALBUM (MP3)
1-RANDOM
A-RANDOM
To
record one selected disc.
record all loaded discs in succession
from the selected disc to the final disc.
record one selected track on the selected
disc.
record one selected album on the disc.
record the disc in random order.
record all loaded discs in random order.
RQT7369-B_21-22_EN 15/1/04, 6:27 pm22
To Next Page
Loading...
Need help?
Amplifier Section
