Recording operations
18
RQT7357
Recording CDs
Preparation:
• Tracks are recorded in the order in which they are found on
the CD.
• Tracks are cut in the middle when the end of the tape is
reached.
• You can record from any point on the tape.
A To record specific CDs/tracks
1 Press [CD 3/8] and then [STOP 7, –DEMO].
2 Press [PLAY MODE] to select your desired mode.
1-TRACK
Original display
1-ALBUM (MP3)
RANDOM
For 1-TRACK mode
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] to select the track.
For 1-ALBUM mode (MP3)
Press [ALBUM ( or )] to select the album.
3 Press [¶/8 REC] to start recording.
To record programmed tracks
This function allows you to record up to 24 programmed tracks.
1 Programme the track(s) you want.
(\ steps 1 - 4 on page 12)
2 Press [¶/8 REC] to start recording.
B Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
To erase a recorded sound
1
Insert the cassette to be recorded on (\ page 17).
2
Press [TAPE] and then [STOP 7].
3
Press [¶/8 REC].
Your attention is drawn to the fact that recording pre-
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
A
3
1
2
ALBUM
( , )
4 /REW/ 4,
3 /FF/ ¢
4 /REW/ 4,
3 /FF/ ¢
1
CD
3
/
8
➞
STOP
7
2
PLAY MODE
3
REC
B
To
stop recording
stop recording
temporarily
Action
Press [STOP 7, –DEMO].
Press [¶/8 REC].
If the tape finishes before the CD,
press [STOP 7, –DEMO] to stop the
CD.
Press [¶/8 REC] to resume
recording.
Mode
1-TRACK
1-ALBUM
RANDOM
To
record one selected track on the disc.
record one selected album on the
disc.
record the disc in random order.
Side A
Tab for side B Tab for side A
To re-record
Normal tape
Adhesive tape
RQT7357-C_17-18_EN 13/1/04, 1:56 pm18
To Next Page
Loading...
