Before use
7
RQT7357
A Demo function
When the unit is first plugged in, a demonstration of its functions
may be shown on the display.
If the demo setting is off, you can show a demonstration by
selecting “DEMO ON”.
Press and hold [STOP
7, –DEMO].
The display changes each time the button is held down.
DEMO OFF DEMO ON
While in the standby mode, select “DEMO OFF” to reduce power
consumption.
B Setting the time
This is a 12-hour clock.
1 Press [
yy
yy
y] to turn the unit on.
2 Press [CLOCK/TIMER] to display “CLOCK”.
Every time you press the button:
CLOCK PLAY
Original display
REC
3 Within 5 seconds
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] to set the time.
Press and hold to change the time faster.
4 Press [CLOCK/TIMER].
The time is set and the original display is restored.
To show the time (when the unit is ON)
Press [CLOCK/TIMER].
The clock is shown for about 5 seconds.
Note
The clock may lose or gain some time over a period.
Readjust if necessary.
C Convenient functions
To dim the display panel
Use this when you are going to sleep or any other time you
would prefer the panel to be dimmer.
Press [DIMMER].
The display panel dims except for the [AC IN] indicator.
To cancel
Press [DIMMER] again.
To mute the volume
This feature is convenient when you have a telephone call, etc.
Press [MUTING].
“MUTING” appears.
To cancel
Press [MUTING] again. (“MUTING” goes out.)
Muting can also be cancelled by lowering the volume all the
way to (-- dB).
When the system is turned off, the muting operation will be
automatically cancelled.
A
T
DEM
B
1
2 4
3
1
2
CLOCK/
TIMER
3
/REW
/FF
4
CLOCK/
TIMER
C
DIMMERMUTING
RQT7357-C_04-07_EN 12/1/04, 5:59 pm7
To Next Page
Loading...
Need help?
General
