Panasonic SC-PTX7 - Playing Tracks of Ipod with the Remote; Control for this Unit; Recording Tracks from Ipod to the HDD; Volume

RQT8927
73
By inserting SH-PD10 (not included) into the OPTION
port and connecting iPod, you can play tracks (audio)
through this unit’s speakers. Additionally, you can use
the remote control for this unit to perform operations
such as play, stop, and record
§
operations on iPod.
§
Only audio tracks can be recorded from iPod.
Preparation
1 Connect the SH-PD10 and iPod as shown on page
72.
2Press [N SELECT O] to switch the selector to
“OPTION”.
By performing the following operations on the remote
control, you can play tracks from iPod.
≥Play will continue from the last track you were listening
to before connecting SH-PD10 and iPod.
You can record tracks from iPod to the HDD.
Press [¥ HDD REC].
Recording starts in the set recording mode (➜ below)
and playing of iPod also starts automatically.
To change the recording mode
1 Press [SUB MENU] while stopped.
2Press [34] to select “Recording Mode”
(➜ page 27) and make changes.
In addition to the recording mode, you can also
change “Auto Track Divide” (➜ page 42), or “Auto
Synchro Level” (➜ page 42).
To stop partway through
Press [∫].
To return to the previous screen
Press
[RETURN].
Playing tracks of iPod with the remote
control for this unit
1 PLAY
;, ∫ PAU S E
:9 SKIP
65 SEARCH
[r s VOLUME] Volume adjust
Recording tracks from iPod to the HDD
≥If “No compatible equipment is connected” is
displayed, then no OPTION-compatible equipment
is connected to the OPTION port.
To select a track you want to record
In “Playing tracks of iPod with the remote control for
this unit” (➜ left), operate the iPod, and press
[¥ HDD REC] after pausing at the beginning of the
track you want to record.
OPTION Sub Menu
Manual
Auto Track Divide
Level0
Auto Synchro Level
LPCM
Recording Mode
ENTER
RETURN
NOTE
TIPS
OPTION port
Advanced Operations
PTX7EB.book Page 73 Monday, March 12, 2007 10:13 AM