RQT8927
80
Using other convenient functions
1 Press [SLEEP].
2 While the time is shown
Press [SLEEP] to select the time (in minutes).
To cancel the timer
While the time is shown, press [SLEEP] to select “OFF”.
To confirm the remaining time
Press [SLEEP] again.
To change the setting
Repeat the procedure from the beginning.
Press [MUTING].
“MUTING” flashes on the unit’s display.
To cancel
≥Press [MUTING] again or reduce the volume to
minimum “VOL 0”, and then raise it to the required
level.
≥Muting is cancelled when you switch the unit to
standby.
1 Reduce the volume and connect the
headphones (not included).
Headphone plug type: ‰3.5 mm stereo mini plug
2 Adjust headphone volume with [r s VOLUME].
≥Audio is automatically switched to 2-channel
stereo.
The Music Port allows you to connect and enjoy music
from an external device (e.g. MP3 player) through this
unit.
Preparation
To avoid distorted sound, make sure that any equalizer
function of your external device is turned off.
1 Reduce the volume and connect the external
device (not included).
Plug type: ‰3.5 mm stereo mini plug
2 Press [N SELECT O] to switch the selector to
“MUSIC PORT”.
3 Adjust the external device volume to a normal
listening level, and then adjust the volume of
the main unit with [r s VOLUME].
Setting the sleep timer
SLEEP 30__)SLEEP 60 ___-) SLEEP 90
^""_ OFF (___ SLEEP 120(__}
Muting the sound
MONO
SLP
ST
MODE
AC
PRG
RDS
DTS
PL
A
PS
H.BASS
SRD
PGM
HDCD
E.
1
D
W
D
MONO
SLP
ST
MODE
AC
PRG
RDS
DTS
PL
A
PS
PTY
H.BASS
SRD
PGM
HDCD
E.
1
CD
DVD
W
D
Using headphones
≥To prevent hearing damage, avoid listening for
prolonged periods of time.
Using the Music Port
VOLUME
MUSIC PORT
OPEN/CLOSE SELECTOR
TUNING
VOLUME
NOTE
VOLUME
MUSIC PORT
OPEN/CLOSE SELECTOR
TUNING
External device
Reduce the volume before connecting.
VOLUME
MONO
ST
MODE
AC
PRG
RDS
DTS
PL
A
PS
PTY
H.BASS
SRD
PGM
HDCD
E.
1
CD
DVD
W
D
PTX7EB.book Page 80 Monday, March 12, 2007 10:13 AM
To Next Page
Loading...
