RQT8927
90
Optional remote control settings
You can operate the television through the unit’s remote
control.
Point the remote control at the television
While pressing [Í TV], enter the code with the
numbered buttons.
e.g., 01: [0] ➜ [1]
Manufacturer and Code No.
Test by turning on the television ([Í TV]).
Repeat the procedure until you find the code that allows
correct operation.
≥If your television brand is not listed or if the code listed
for your television does not allow control of your
television, this remote control is not compatible with
your television.
Change the remote control code on the main unit and
the remote control (the two must match) if you place
other Panasonic products close together.
Use “Mode 1”, the factory set code, under normal
circumstances.
Preparation
1 To display the picture turn on the television and
select the appropriate video input to suit the
connections to this unit.
2Press [Í].
1 While stopped
Press [SETUP].
2 Press [34] to select “Other Setup” and press
[ENTER].
3 Press [34] to select “Remote Control” and
press [1].
4 Press [ENTER].
5 Press [34] to select the
mode (“Mode 1” or “Mode
2”) and press [ENTER].
6 To change the code on the
remote control
While pressing [ENTER], press and hold the
numbered button ([1] or [2]) for more than 5
seconds.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
∫ When the following indicator and display
appears on the unit’s display and the TV.
Change the code on the remote control to match the
main unit’s (➜ step 6).
Television operation
Brand Code Brand Code
Panasonic 01/02/03/
04/45
NOKIA 25/26/
27
AIWA 35 NORDMENDE 10
AKAI 27/30 ORION 37
BLAUPUNKT 09 PHILIPS 05/06
BRANDT 10/15 PHONOLA 31/33
BUSH 05/06 PIONEER 38
CURTIS 31 PYE 05/06
DESMET 05/31/33 RADIOLA 05/06
DUAL 05/06 SABA 10
ELEMIS 31 SALORA 26
FERGUSON 10 SAMSUNG 31/32/
43
GOLDSTAR/
LG
31 SANSUI 05/31/
33
GOODMANS 05/06/31 SANYO 21
GRUNDIG 09 SBR 06
HITACHI 22/23/31/
40/41/42
SCHNEIDER 05/06/
29/30/
31
INNO HIT 34 SELECO 06/25
IRRADIO 30 SHARP 18
ITT 25 SIEMENS 09
JVC 17/39 SINUDYNE 05/06/
33
LOEWE 07/46 SONY 08
METZ 28/31 TELEFUNKEN 10/11/
12/13/
14
MITSUBISHI 06/19/20 THOMSON 10/15/
44
MIVAR 24 TOSHIBA 16
NEC 36 WHITE
WESTINGHOUSE
05/06
Operating the television
[Í TV] (Turn the television on/off)
[TV/AV] (Change the television
’s video input
mode
)
[r s VOLUME](Adjust the television volume)
When other Panasonic equipment is
located nearby
Setup for Video
Other Setup
DVD
VIDEO
HDMI
DISPLAY
Remote Control
Clock / Timer
TV Audio Input
Power On/Off
Network
Maintenance
Setup
ENTER
Main screen
Remote Control
Mode1
Mode2
ENTER
Cancel
Please set your remoto control to Mode2.
DISC SFC
TG
D.MIX
MONO
SLP
ST
CT
MODE
AC
PRG
RDS
DTS
PL
A
PS
Y
H.BASS
2
SRD
PGM
HDCD
E.
1
RND
D
W
D
The unit’s remote
control code
PTX7EB.book Page 90 Monday, March 12, 2007 10:13 AM
To Next Page
Loading...
