RQT8927
95
∫ Router settings
≥We recommend setting the DHCP for the router to “ON” (the setting to automatically assign IP addresses).
This is usually set to “ON”, therefore changes may be unnecessary.
≥Depending on the security settings of the router, this unit may not be able to connect to the Internet.
∫ Settings for this unit
≥When the DHCP server function is set to “ON”, you can use the default settings for this unit; no changes to the
settings are necessary.
≥Depending on the router settings, you may need to make changes to the network settings on this unit (➜ page 96,
Changing the network settings).
∫ Responsibility disclaimer
≥Panasonic will not accept responsibility for unintended consequences, malfunctions, hang-ups, or other damage
resulting from connections of unapproved devices or software.
≥Implementing router security requires a high level of knowledge of networking. If you are setting security levels,
do so at your own risk. Panasonic accepts no responsibility for problems caused by security settings.
Furthermore, Panasonic cannot address questions relating to the settings and usage of each device.
≥CD title information cannot be obtained from the online Gracenote
®
database if you connect to the Internet
using a Proxy connection.
NOTE
Reference
Optional settings and connections
PTX7EB.book Page 95 Monday, March 12, 2007 10:13 AM
To Next Page
Loading...
