32
Step 3 Remove 2 screws.
10.14 Replacement for the pinch roller ass’y
, capstan belt A, capstan belt B and
winding belt
· Follow the (Step 1) - (Step 2) of Item 10.3 - Disassembly
of Top Cabinet
· Follow the (Step 1) - (Step 6) of Item 10.4 - Disassembly
of CD Lid
· Follow the (Step 1) of Item 10.5 - Disassembly of the
Rear Panel
· Follow the (Step 1) - (Step 3) of Item 10.6 - Disassembly
of the CD Mechanism Unit
· Follow the (Step 1) - (Step 3) of Item 10.10 - Disassembly
of the Front Panel Unit
· Follow the (Step 1) - (Step 5) of Item 10.11 - Disassembly
of the Deck Mechanism Unit.
Step 1 Release the 2 claws, and then remove the head
connector.
Step 2 De-solder plunger point.
Step 3 Remove the Deck Mechanism P.C.B.
Step 4 Remove 3 screws.
Step 5 Remove the flywheel R.
Step 6 Release the claw of tape side, and then remove
the winding lever and spring.
Step 7 Remove the flywheel F.
To Next Page
Loading...
