28
7.12. Heater case base assy and heater case unit
1. Remove the 4 screws and detach the heater case base
assy.
2. Remove the heater case unit from the angle.
Tips on assembly
• Set the positioning marks across from each other on the
heater case side and on heater case base side.
7.13. Heater
1. Take the 3 claws off from the heater insulator at the out-
side of the heater case unit.
2. Remove the screw and hexagon nut fixing heater insula-
tor A.
3. Pull out the heater upward.
To Next Page
Loading...
