3.3. Formatting HDD
When HDD is exchanged, format HDD as the procedure below.
Without formatting, the error message appears on the LCD display when accessing HDD.
<Formatting procedure>
Rotate the mode dial to select
.
Select [HDD] in [MEDIA SELECT].
1. Press the MENU button, then
select [SETUP] ®
®®
®
[FORMAT HDD] ®
®®
® [YES] and
press the joystick.
2. When the confirmation message
appears, select [YES], then press
the joystick.
·
When formatting is complete, press the MENU
button to exit the message screen.
Note:
·
During formatting, do not turn this unit off.
·
When you format the HDD, use a battery with
sufficient battery power or the AC adaptor.
·
During formatting, do not cause any vibrations
or impacts to this unit.
13
SDR-H20E
To Next Page
Loading...
