How to fix a Panasonic TH-32EF1U Monitor with no picture?
If your Panasonic Monitor displays no picture, ensure it is plugged into an AC outlet and switched on. You can check this by pressing the Main Power On/Off button or the Standby (ON/OFF) button.
How do I fix the cut off picture on my Panasonic TH-32EF1U Monitor?
If the top or bottom of the picture is cut off on your Panasonic Monitor screen, adjust the position of the picture on the screen.
What to do if there is no picture or sound on my Panasonic Monitor?
If there is no picture displayed or sound output on your Panasonic Monitor when using HDMI or DVI signals input through a selector or distributor, try turning the power off and on again, or replacing the selector or distributor.
What to do if the Panasonic TH-32EF1U remote control is not working?
If your Panasonic Monitor remote control isn't working, check if the batteries are discharged or inserted incorrectly. Also, ensure the remote control sensor isn't exposed to outdoor light or strong fluorescent light and that there are no obstacles between the sensor and the remote. Verify that you are using the remote control specifically designed for this unit and that the correct settings are selected in the options menu and ID mode.
Why does my Panasonic TH-32EF1U power off automatically?
If your Panasonic Monitor is turning off unexpectedly, review the settings for [No signal power off], [HDMI1 power management], [HDMI2 power management], [DVI-D power management], [PC power management] and [No activity power off]. Ensure none of these are set to [On (Enable)].
What to do if the LAN is uncontrollable on a Panasonic TH-32EF1U Monitor?
If the LAN is uncontrollable on your Panasonic Monitor, verify that the connection has been made properly. Also, check that [Network control] is set to [On], [LAN setup] is set properly, and set [AMX D. D.] or [Crestron Connected™] according to the device to use.
How to fix a Panasonic Monitor display error or disabled remote?
If your Panasonic Monitor shows a display error like “no picture” or the remote control is disabled, remove the power plug from the socket outlet and reinsert it after 5 seconds or more to turn the power back on.
Why does it take a while for the picture to appear on my Panasonic Monitor?
When you turn on the power or switch the input on your Panasonic Monitor, it may take a few moments for the picture to appear.
How to check mute function on Panasonic TH-32EF1U Monitor?
If you have a normal picture on your Panasonic Monitor, check whether the mute function has been activated on the remote control.
What to do if the RS-232C is uncontrollable on a Panasonic TH-32EF1U Monitor?
If the RS-232C is uncontrollable on your Panasonic Monitor, verify that the connection has been made properly.
To Next Page
General