Panasonic TH-32EF1U - Page 51

51
English
[Shortcut]
[Signal], [Screensaver], [Set up timer], [Power
management settings], [Network settings]
●
Pressing the numeric button displays the menu
screen. Pressing the button again exits the
menu screen.
[AV mute]
●
Pressing the numeric button mutes the audio
and pictures.
To cancel, press any button on the remote
control except the <Standby (ON/OFF) button>.
Shipping condition
The following functions are assigned to the numeric
buttons as factory default.
[Input]
[Memory
load]
[Shortcut]
1 HDMI1 MEMORY1 [Signal]
2 HDMI2 MEMORY2 [Screensaver]
3 DVI-D MEMORY3 [Set up timer]
4 PC MEMORY4
[Power
management
settings]
5
VIDEO MEMORY5
[Network
settings]
6 USB MEMORY6 AV mute
■ [Function button guide]
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[On]:
Displays the function list for the numeric buttons.
[Off]:
Does not display the function list. Operation starts
when numeric buttons are pressed.
Note
●
When <FUNCTION> is pressed, [Function button
guide] will be displayed regardless of the [On] / [Off]
settings.
■ To use shortcut (numeric buttons)
1
Press <FUNCTION> or <1> ‒ <6>.
[Function button guide] will be displayed.
[Function button guide]: When [Off] is set, pressing
the numeric button starts operation.
Example: Input
1.
2.
3.
4.
5.
6.
HDMI 1
HDMI 2
DVI-D
PC
VIDEO
USB
Input
2
Press <FUNCTION> to switch function
group.
Example: Memory load
1.
2.
3.
4.
5.
6.
MEMORY 1
MEMORY 2
MEMORY 3
MEMORY 4
MEMORY 5
MEMORY 6
Memory load
3
Press <1> ‒ <6>.
The function for the pressed button starts to operate.
Example: When <2> is pressed.
Memory load
Load from “MEMORY2”
Ok Cancel