Option Menu
LA45 chassis series have special function and operation setting facility called Option Menu. This Option Menu is useful for
special function required customers. This should be set at the installation stage.
Option menu Default setting Contents
Input Search Set auto input switching for when there is no signal.
On screen display On Enable/disable to display input mode indication after power on and
no signal indication.
Initial input Off Sets the initial input mode when the power is turned on. Allow input
mode selection while power is on.
Initial VOL level Off Sets the initial volume level when the power is turned on. Allow
Volume control while power is on.
Maximum VOL level Off Sets the maximum volume to desired level. Volume cannot exceed
this level.
Input lock Off Fixes the input mode to PC, DVI, or HDMI. Can not change input
mode by input selection key.
Button lock Off Enable/Disable bottom operation buttons (Input, Menu, Enter
and/or volume up/ down).
Remocon User level Off Remote key invalidation.
Off: Valid key is all key of remote.
User1: Valid key are only Stand-by (ON/OFF), Input, RECALL,
Sound mute On/Off, and volume adjustment.
User2: Valid key is only Stand-by (ON/OFF).
User3: All keys are null and void
Off-timer function Enable Off-timer operation Enable/Disable.
Initial Power Mode Normal Sets the power mode of the unit for when the power recovers from
failure or after plugging off and in again.
ID select 0 Sets panel ID number when panel is used in “Remote ID” or “Serial
ID”.
Set value range: 0 – 100
(Standard value: 0)
Remote ID Off Remote ID function On/Off.(While the Remote ID on, standard
remote function can not control the unit.)
Serial ID Off Serial ID function On/Off
Studio W/B Off Studio W/B function On/Off
Power ON Screen Delay Off You can set the power-on delay time of the displays to reduce the
power load, when you press
to turn on the multiple displays
that are set together, for example, on MULTI DISPLAY system.
Set each display’s setting individually.
Clock Display Off The clock is displayed at the lower left of the screen when RECALL
button is pressed.
Power On Message (No activity power off) Off Whether to show/hide No activity power off Precautions at the time
of power ON is set.
Function button assign 1
Function button assign 2
Signal
Screensaver
Set the functions that operates when
is pressed.
Note:
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID”
adjustments, set all the values “Off” so that all the buttons are enabled again. Press the “Volume down” button on main unit
together with “R” button on the remote control and hold for more than 5 seconds. The “Shipping” menu is displayed and the
lock is released when it disappears.
To Next Page
Loading...
