Panasonic TH-50PF11UK - Removal of Plasma Display Panel

27
TH-50PF11UK
8.19.2. Removal of V1-Board and V2-Board
1. Remove 13 screws and then remove the Fixed Angle
(bottom, right).
2. Remove 1 screw (M).
3. Disconnect the connector (V2) and then remove V1-
Board.
4. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
5. Disconnect the connector (V15) and then remove V2-
Board.
6. Remove 3 hooks and then remove the Power Button and
Power Button Spring.
8.19.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Remove the Cabinet Assy.
8.20. Removal of Plasma Display
Panel
The C1,C2,C3 Boards are connected with the Plasma Dis-
play Panel for the repair.
1. Disconnect the Fan Relay Connectors.
2. Remove 14 screws and then remove 4 Fan Blocks (1, 2,
3, 4).
3. Disconnect the connectors (DN3, DN5).
4. Remove the flexible cables from the connectors (DN1,
DN2).
5. Remove 4 screws and then remove the DN-Board Block.