30
TH-50PF11UK
28. Remove 11 screws.
29. Pull the bottom of the Plasma Display Panel forward
(arrow1).
30. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
31. Remove the Rear Cover Hook Right and Rear Cover
Hook Left from the Plasma Display Panel.
32. Remove the 8 Rear Cover Spacers and BC Spacer Rings
from the Plasma Display Panel.
Caution:
• Please confirm the installation place of Rear Cover Hook
Right, Rear Cover Hook Left, Rear Cover Spacer and BC
Spacer Ring when you exchange the Plasma Display
Panel, and install them in an original installation place
after exchanging the Plasma Display Panel.
To Next Page
Loading...
