Panasonic TH-50PH10BK - Page 18

44. Remove 2 screws and then remove the S1-Board Block.
45. Remove 3 screws and then remove the AC-Inlet Block.
46. Remove 6 screws of the Escutcheon.
47. Pull the bottom of the Plasma Panel forward (arrow1).
48. Slide the Plasma Panel and then remove the Plasma Panel
(arrow2).
18
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES