Panasonic TH-65PB1E - Connections; Speaker Connection; AC Cord Connection and Fixing

10
Connections
Speaker connection
1 2
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.
AC cord connection and  xing, cable  xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
AC cord  xing
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet  rst.
hole
To loosen:
hooks
To remove from the unit:
Insert the clamper
in a hole.
Bundle the cables
snaps
Keep pushing
both side
snaps
Set the
tip in the
hooks
knob
Keep
pushing
the knob
Attach the clamper
1
2
Red
Black
While pressing the lever,
insert the core wire.
Red
Black
Return the lever.
Note:
Please use 8 /10 W speaker.