Panasonic TH-85PF12U - Picture Profiles; Saving and Loading Profiles; Editing and Managing Profiles

30
TH-85PF12U
3. Remove 9 screws and then remove P-Board (SUB).
9.14. Removal of F-Board
1. Remove the Rear Cover Angle block (center).
(Refer to Removal of D-board)
2. Remove 4 screws and then remove Rear Cover Connect-
ing Metal (A).
3. Disconnect the connectors (F1, F9, F91).
4. Remove 5 screws and then remove F-Board.
9.15. Removal of S1-Board and V2-
Board
1. Remove 1 screw ( ).
2. Remove 1 screw ( ) and then remove the Side Power
Unit.
9.15.1. Removal of S1-Board
1. Remove 2 screws (J) and then remove the Power Button
Bracket.
2. Remove 1 screw (K).
3. Disconnect the connector (S34) and then remove S1-
Board.
4. Remove 2 hooks and then remove the Power Button and
Power Button Spring.