38
TH-85PF12U
2. Remove the flexible cable from the connector (C40).
3. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA13, CA14, CA15, CA16).
4. Remove 6 screws ( ) and then remove C4-Board (lower).
9.31. Removal of AC Cord
1. Remove the AC Cord Cover Holder.
(Refer to Removal of C2-Board (lower))
2. Disconnect the connector (F1).
3. Remove 3 screws and then remove the AC Cord.
9.32. Removal of Front Glass, V1,
V3-Board and Cabinet Assy
1. Disconnect the connectors (DS15, S34).
2. Disconnect 2 Relay Connectors.
3. Remove the Side Power Unit.
(Refer to Removal of S1-Board and V2-Board )
4. Remove 16 screws and then remove Cabinet Block.
5. Pull the bottom of the Cabinet Block forward and lift.
6. Remove the Cabinet Block.
To Next Page
Loading...
