Watching TV
15
Watching TV
Volume
1
Turn power on
●
Press for about 1 second.
●
Mains power On / Off switch should be on. (p. 10)
2
Select the mode
●
You can also select the mode pressing the TV
button repeatedly on the remote control or the
TV (p. 10).
3
Select a channel
up
down
or
DVB channel position numbers run from 1 onwards.
Analogue channel position numbers run in the ranges
0 - 99.
●
To select a more than two-digit channel position
number, e.g. 399
■ To select a channel using Information banner (p. 16)
It is possible to confirm the channel name and programme information by using the Information banner before
changing channels.
1 Display Information banner if it is not displayed
2 While the banner is displayed, select the channel
select channel
watch
■ To select a channel using TV Guide (p. 19)
It is possible to confirm the channel and programme information by using the TV Guide (EPG) before changing
channels.
1 Display TV Guide
2 Select the current
programme or channel
select
access
3 Select [View] (DVB)
Das Erste
19:30- 20:00
View Timer Programming
select
watch
Note
●
To watch pay-TV “Using Common Interface” (p. 49)
To Next Page
Loading...
