Connections
26
Using a HUB for Direct Connection
The PC connects to the camera using the camera port and the client PC port on the rear of the recorder.
Camera images input through the camera port are sent to the PC from the client PC port.
2 Port Operation
Important:
• Connect the camera to the camera port and the PC to the client PC port.
Connect the devices correctly. Otherwise, the transmission rate may be lowered.
HUB
PC
PC
Recorder
Network camera
HUB
LAN cable
(Not provided: 10BASE-T /
100BASE-TX / 1 000BASE-T
category 5e, straight (NTSC model) /
category 7, straight (PAL model))
ND400_Basic.book 26 ページ ２００８年４月８日 火曜日 午後３時５９分
To Next Page
Loading...
