Using the Front Panel for Operations
41
For checking information (software version, hardware version, MAC address, or serial number) about the recording system. Check the settings by
switching between screens using the following operations.
The LCD changes as follows when using the arrow buttons (up or down). Also, pressing the arrow buttons (left or right) from [PT#1 MAC address]
switches between the PT#2 and PT#3 screens.
Checking System Information
[SET]
[ESC]
ND400_Basic.book 41 ページ ２００８年４月８日 火曜日 午後３時５９分
To Next Page
Loading...
