Panasonic Workio DP-1520P - Interrupt Mode; Energy Saver (Power Saver Mode, Sleep;Shutdown Mode); Job Memory

42
Making Copies
or
■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode)
These modes save power while the machine is not in use.
To enter
To exit
Other Features
or
Automatically enters
the Power Saver
Mode after 10
minutes
∗
from
the last job.
Automatically enters the Sleep/
Shutdown Mode after 10 minutes
∗
from the last job.
NOTE
∗
To adjust the default Sleep/
Shutdown Mode timer, see
page 46.
■ Interrupt Mode
This mode interrupts the
current running copy job and
allows other copy jobs to be
processed.
Other Job
1 2
Power Saver Mode
Sleep/Shutdown Mode
Flashes :
Power Saver
Mode
To exit
Lights :
Sleep/Shutdown
Mode
■ Job Memory
Two Copy Jobs can be stored in Memory
(M1 to M2) for recall at a later time.
To store a job in memory
21
Set up the copy
job to be stored.
(See pages 24-37)
or
For ADF
For i-ADF
or Any Key
(See pages 24-37)