Panasonic Workio DP-1520P User Manual

48
Function
25 HARD DISK FORMAT
∗
1
Formats the hard disk.
PRESS SET TO START
26 HARD DISK ERR CHK
∗
1
Selects the provision for the hard disk error check.
PRESS SET TO START
27 ABBR GROUP ID Inputs the Group ID for the address book. 0
0-99
28 COMMUNITY NAME(1)
∗
2
Selects whether to change the Community public
Name(1) SNMP.
Enable read only
29 COMMUNITY NAME(2)
∗
2
Selects whether to change the Community public
Name(2) SNMP.
Enable read/write
30 DEVICE NAME
∗
2
Inputs the device name when required.
(For Status Monitor/EtherTalk Machine Name)
31 DEVICE LOCATION
∗
2
Inputs the device name when required.
(For Status Monitor)
No.
Modes Function
Initial
Setting
■ General Settings (For Key Operator) (Continued)
NOTE ∗1Available only when the optional Hard Disk Drive Unit is installed.
∗2 When Parameters No. 28 to 31 are set, cycle the power by turning the Power Switch on the Right Side of the
machine OFF and ON.

Panasonic Workio DP-1520P Specifications

General

Brand	Panasonic
Model	Workio DP-1520P
Category	All in One Printer
Language	English