Panasonic WV-CW960/G

-44-
SCENE SELECT SETTING
■ Using the Scene Select Setting
Menu
Display the scene select setting menu from the setup
menu to configure scene select settings. First, display
the scene select setting menu.
1. Display the setup menu (page 22), move the cursor
to SCENE SELECT O, and then press the CAM
(SET) button.
This will display the scene select setting menu.
● Scene Select Settings
See page 23 for information on the scene select
settings method.
**SCENE SELECT**
SCENE INDOOR(L)
LOAD
RET TOP
WV-CW960GCW964EUS08.12.410:49AMページ44