EasyManua.ls Logo

Panasonic WV-S2231L - User Manual

Panasonic WV-S2231L
33 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Important Information
Network Camera
WV-S2131L
WV-S2131L
* For information about the installation tasks, refer to the provided Installation
Guide. For information about how to perform the settings and how to operate
the camera, refer to the Operating Instructions on the provided CD-ROM.
*
WV-S2131LPJ, WV-S2131LRF and WV-S2131LEG are the same model as the
Network Camera WV-S2131L.
Model No. WV-S2231L / WV-S2211L
WV-S2131L / WV-S2131LPJ
WV-S2131LRF / WV-S2131LEG
WV-S2131 / WV-S2130
WV-S2111L / WV-S2110

Table of Contents

Other manuals for Panasonic WV-S2231L

Preview: Important Information
Important Information33 pages
Preview: Cautions On Using
Cautions On Using2 pages

Questions and Answers

  • V
    Veronica MillerAug 2, 2025
    Why is the focus not automatically adjusted on my Panasonic WV-S2231L?
    • T
      tiffany90Aug 2, 2025
      If the focus on your Panasonic Security Camera isn't automatically adjusting, it might be due to several factors. When the subject moves a lot, when there are large changes to the lighting intensity, when the light level is low, when the subject or location is extremely bright or reflective, when viewing through windows, when the dome cover is in a locations where it can easily become dirty, locations where there is not much contrast such as a white wall, or when there is harsh flickering, you should manually adjust the focus.
  • M
    matthew82Aug 8, 2025
    What to do if the LINK indicator does not light on Panasonic Security Camera?
    • L
      Laura LewisAug 8, 2025
      If the LINK indicator on your Panasonic Security Camera doesn't light up orange when the Ethernet cable is connected, ensure the Ethernet cable is properly connected. Also, verify that the hub or router you're using is working correctly. If the issue persists, try replacing the Ethernet cable with a different one.
  • K
    Kathryn GonzalesAug 15, 2025
    How to fix audio input noise in Panasonic WV-S2231L Security Camera?
    • J
      Jennifer VasquezAug 15, 2025
      If your Panasonic Security Camera's audio input contains noise, check the grounding of the camera, switching hub, and any peripheral devices. You may also need to use a powered microphone or connect an audio output with low output impedance.
  • A
    Arthur WalkerAug 20, 2025
    What to do if SD ERROR/AF indicator lights red on Panasonic Security Camera S2131L S2111L?
    • K
      Kimberly ChristensenAug 20, 2025
      If your Panasonic S2131L or S2111L Security Camera shows an SD ERROR or the AF indicator lights up red, try the following: First, unlock the write protect switch on the SD memory card. If that doesn't work, use an SD memory card that has been formatted on the camera. If the problem continues, replace the card with a normal one.
  • V
    Vickie GlassAug 27, 2025
    What to do if my Panasonic Security Camera power is not turned on?
    • T
      teresabarnettAug 27, 2025
      If your Panasonic Security Camera isn't powering on, here are a couple of things to check: * **PoE Device:** If you're using a PoE (Power over Ethernet) device, make sure the connection is properly established. * **DC Power Supply (S2131L S2111L):** If you're using a DC power supply, double-check that the power plug is firmly connected.

Summary

Key Camera Functions

User Manuals and PC Requirements

System Requirements for PC

Lists the necessary hardware and software specifications for PC operation.

Open Source and Network Security

Network Security Guidelines

Recommendations for securing the camera on a network against risks.

General Precautions

Electrical, Fire, and Impact Safety

Avoid foreign objects, flammable atmospheres, impact, and unauthorized disassembly.

Installation and Physical Integrity

Ensure secure mounting, avoid salt damage, and use proper brackets for stability.

Operational Safety and Dealer Service

Stop operation if issues arise and refer installation to dealers.

Precautions for Use and Handling

Internet Accessibility Security

Secure the product from unauthorized access when accessible via the internet.

Stable Performance and Environment

Use the product in suitable conditions and avoid heat, humidity, and moisture.

Precautions for Installation

Secure Mounting and Area Selection

Ensure secure mounting to strong surfaces and select appropriate installation areas.

Environmental and Location Restrictions

Avoid flammable atmospheres, chemicals, moisture, extreme temperatures, and sulfur sources.

Operational and Power Safety

Handle power supply safely and stop operation if issues arise.

Indoor Use Designation

Product is designed for indoor use; avoid direct sunlight and heaters.

Installation Practices and Network Setup

Lightning Protection and Radio Interference

Install lightning arrestors and be aware of radio interference sources.

PoE and Router Configuration

Use compliant PoE devices and routers with port forwarding for network connection.

Audio and Input;Output Terminal Details

12 V DC Power Supply Cautions

Provides cautions and important notes for the 12 V DC power input.

Button and Indicator Functionality

INITIAL SET Button Operation

Steps for initializing the network camera and switching monitor output.

SD Memory Card Management

Inserting an SD Memory Card

Steps for inserting an SD memory card and confirming its recognition.

Removing an SD Memory Card

Procedure for safely removing an SD memory card.

SD Memory Card Usage Notes

Important notes on formatting, compatibility, and durability of SD memory cards.

Troubleshooting Power and Link Issues

Power Not Turning On

Solutions for power issues with PoE or DC power supply.

LINK Indicator Not Lit

Troubleshooting steps when the LINK indicator is not orange.

SD ERROR;AF Indicator Red

Solutions for when the SD ERROR/AF indicator lights red.

Troubleshooting Audio and Focus

Audio Input Noise Causes

Causes and solutions for noise in audio input.

Focus Adjustment Problem Solving

Reasons why automatic focus may fail and manual adjustment.

Specifications - Basic Details

Power Source and Consumption

Specifications - Camera Features

Specifications - Lens and Resolution

Zoom Ratio and Focal Length

Resolution and Frame Rates Supported

Specifications - Compression and Protocols

Image Compression Methods

Specifications - Security and Compatibility

Security Features Overview

Panasonic WV-S2231L Specifications

General IconGeneral
Camera TypeDome
Resolution1920 x 1080
Focal Length2.8 mm to 8.4 mm
Optical Zoom3x
Digital Zoom10x
Max Resolution1920 x 1080
Day/Night FunctionYes
Wide Dynamic Range (WDR)Yes
Ingress ProtectionIP66
Vandal ResistanceIK10
Sensor TypeMOS
Effective PixelsApprox. 2.1MP
Angle of View (Horizontal)108° to 35°
Video CompressionH.264, H.265
Power SupplyPoE (IEEE 802.3af)
Operating Temperature-10 °C to +50 °C
IR Distance30 m (98 feet)
Power Consumption6.5 W
Lens TypeVarifocal

Related product manuals