Panasonic WV-SC588A - Page 18

Examples of when using the optional brackets to install the camera
Ceiling mount bracket
WV-Q105
Ceiling embedding bracket
WV-Q126A
Wall mount bracket
WV-Q119
IMPORTANT:
 • Beforestarting theinstallation/connection, preparethe requireddevices andcables. Before startingthe connection,
turn off the power of the devices including the camera and the PC or disconnect from the 12 V DC power supply.
 • Removethecoverfilmfromthelensaftertheinstallationiscomplete.
 • Whenusing12VDCpowersupply,strip3mmto7mm{1/8inchesto9/32inches}fromtheendofthewire,and
twist the stripped part of the wire sufficiently to avoid short circuit, before installing the camera and connecting the
cables (☞ page 22).
 • Besuretoinstallthesafetywiretopreventafallofthecameraresultingininjuryoraccidents.
18