Connection example
When connecting with a PC directly
(12 V DC)
LAN cable
(category 5 or better, cross)
PC
Microphone
Recommended total extended
<Required cable>
LAN cable (category 5 or better, cross)
When connecting to a network using a PoE hub
PoE device (hub)
PC
LAN cable (category 5
or better, straight)
(for adjustment use only)
Adjustment monitor
(for adjustment use only)
LAN cable
(category 5 or better,
straight)
LAN cable
(category 5 or better, straight)
Powered speaker
Microphone
Microphone
Recommended total extended
<Required cable>
LAN cable (category 5 or better, straight)
IMPORTANT:
• Theadjustmentmonitorisusedforcheckingtheadjustmentoftheangularfieldofviewwheninstallingthecameraor
when servicing. It is not provided for recording/monitoring use.
• Depending onthe adjustmentmonitor, somecharacters (camera title,presetID, etc.)may notbe displayed on the
screen.
• Useaswitchinghuborarouterwhichiscompliantwith10BASE-T/100BASE-TX.
• IfaPoEhubisnotused,eachnetworkcameramustbeconnectedtoapowersupply.
• Whenusing12VDC,powersupplyfromaPoEhuborrouterisnotrequired.
*
Recommended cable length from the speaker: less than 10 m {32.8 feet}
Recommended cable length from the microphone: less than 1 m {3.28 feet}
*
Recommended cable length from the speaker: less than 10 m {32.8 feet}
Recommended cable length from the microphone: less than 1 m {3.28 feet}
24