Panasonic WV-SF438

To Next Page

To Previous Page

5. Click “Finish”.

178 Operating Instructions

17 Configuring the network settings [Network]

Main Page

Default Chapter1
- Network Camera1
- About Notations2
- About the User Manuals2
- Trademarks and Registered Trademarks2
- Viewer Software3
- Table of Contents4
1 Monitor Images on a PC7
- Monitor Images from a Single Camera7
- About Live Image Types9
- Type of Images that Can be Displayed According to the Image Setting9
- About Image Capture Mode9
- Image Types10
- About Image Types and Available Functions14
- About Available Resolutions15
- About the "Live" Page18
- Monitor Images from Multiple Cameras23
2 Monitor Images on a Cellular Phone/Mobile Terminal24
- Monitor Images on a Cellular Phone24
- Monitor Images on a Mobile Terminal27
3 Record Images on the SD Memory Card Manually35
4 Action at an Alarm Occurrence37
- Alarm Type37
5 Transmit Images Onto an FTP Server39
- Transmit an Alarm Image at an Alarm Occurrence (Alarm Image Transmission)39
- Transmit Images at a Designated Interval or Period (FTP Periodic Image Transmission)39
- Save Images on the SD Memory Card When Images Fail to Transmit Using the FTP Periodic Image Transmission Function40
6 Display the Log List41
- About the Log List Window43
7 Playback of Images on the SD Memory Card45
- About the Playback Page46
- Download the Images (When "H.264(1)" or "H.264(2)" Is Selected for "Recording Format" of the SD Memory Card)48
8 About the Network Security50
- Equipped Security Functions50
9 Display the Setup Menu from a PC51
- How to Display the Setup Menu51
- How to Operate the Setup Menu53
- About the Setup Menu Window55
10 Configure the Basic Settings of the Camera [Basic]57
- Configure the Basic Settings [Basic]57
- Configure the Settings Relating to the SD Memory Card [SD Memory Card]61
  - Frame Rate67
  - Image Quality68
- Access Copy Images Saved on the SD Memory Card Onto the PC [SD Memory Card Images]70
- Configure the Settings Relating to the Logs [Log]79
- How the Logs and Images Are Saved Depending on the Settings for "Alarm81
- How the Logs and Images Are Saved Depending on the Settings for "Manual/Schedule82
- How the Logs and Images Are Saved Depending on the Settings for "FTP Error84
11 Configure the Settings Relating to Images and Audio [Image/Audio]85
- Configure the Settings Relating to Images [JPEG/H.264]85
- Configure the Settings Relating to JPEG Images [JPEG/H.264]87
- Image Quality Setting89
- Configure the Settings Relating to H.264 Images [JPEG/H.264]90
- Configure the Settings Relating to the Camera Operations [Cam. Function]98
- Configure the Settings Relating to Image Adjust, Preset Positions, Privacy Zone, and VIQS [Image/Position]100
- Configure the Settings Relating to Image Quality ("Image Adjust" Setup Menu)101
  - Auto Slow Shutter104
  - White Balance105
- Set Mask Areas106
- Configure the Preset Positions (Preset Position Setup Menu)109
- Configure the Preset Positions (Initial Position Setup Menu)110
- Configure the Settings Relating to the Privacy Zone ("Privacy Zone" Setup Menu)115
- Configure the VIQS Setting117
- Configure the VIQS Area119
- Configure the Settings Relating to Audio [Audio]120
12 Configure the Multi-Screen Settings [Multi-Screen]123
- Camera Title124
13 Configure the Alarm Settings [Alarm]125
- Configure the Settings Relating to the Alarm Action [Alarm]125
- Configure the Settings Relating to the Alarm Image [Alarm]126
- Configure the Settings Relating to H.264 Recording [Alarm]130
- Configure the Settings Relating to the Alarm Output Terminal [Alarm]131
- Change the AUX Name [Alarm]132
- Configure the VMD Settings [VMD Area]132
- Set the VMD Areas [VMD Area]134
- Configuration of the Settings Relating to the E-Mail Notification [Notification]136
- Configure the Settings Relating to Panasonic Alarm Protocol [Notification]137
- Panasonic Alarm Protocol138
14 Configure the Setting Relating to the Image Recognition [Advanced Func.]140
- Configure the Settings Relating to the XML Notification [XML Notification]140
- Destination Address141
- Configuration of the Settings Relating to the Face Detection [Face Detection]142
15 Configure the Settings Relating to the Authentication [User Mng.]144
- Configure the Settings Relating to the User Authentication [User Auth.]144
- Configure the Settings Relating to the Host Authentication [Host Auth.]145
- Configure the Settings Relating to the Priority Stream [System]146
- Stream Type147
16 Configure the Settings of the Servers [Server]149
- Configure the Settings Relating to the E-Mail Server [E-Mail]149
- Configure the Settings Relating to the FTP Server [FTP]150
- Configure the Settings Relating to the NTP Server [NTP]151
- Time Zone153
17 Configuring the Network Settings [Network]154
- Configure the Network Settings [Network]154
  - Network Settings155
  - Subnet Mask156
- Configure the HTTPS Settings162
- Generation of the CRT Key (SSL Encryption Key)163
- Generation of the Self-Signed Certificate (Security Certificate)164
- Generation of CSR (Certificate Signing Request)166
- Installation of the Server Certificate167
- Configuration of the Connection Protocol168
- Access the Camera Using the HTTPS Protocol169
- Install the Security Certificate169
- Configure the Settings Relating to DDNS [DDNS]179
- Configuration of the DDNS Service (Example of the "Viewnetcam.com" Service)180
- When Using the "Viewnetcam.com" Service181
- Procedure to Register Information for the "Viewnetcam.com" Service182
- Checking the Information Registered for the "Viewnetcam.com" Service183
- When Using "Dynamic DNS Update183
- When Using "Dynamic DNS Update(DHCP)184
- Configure the Settings Relating to SNMP [SNMP]184
- Configure the Settings Relating to the FTP Periodic Image Transmission [FTP Img. Trans.]185
- Trans.]185
  - Configure the Schedule Settings of the FTP Periodic Image Transmission [FTP Img. Trans.]188
- Trans.]188
  - How to Set the Schedules188
  - How to Delete the Set Schedule189
18 Configure the Settings Relating to the Schedules [Schedule]191
19 Maintenance of the Camera [Maintenance]194
- Check the System Log [System Log]194
- Upgrade the Firmware [Upgrade]195
- Check the Status [Status]196
- Reset the Settings/Reboot the Camera [Default Reset]197
20 About Function Restrictions199
- Function Restrictions When "VGA Quad Streams [4:3]" Is Selected199
- Function Restrictions When "3M Fisheye [4:3]" Is Selected199
21 Using the CD-ROM201
- About the CD Launcher201
- Installing Panasonic "IP Setting Software202
- Installing the Manuals203
- Installing the Viewer Software203
- Configure the Network Settings of the Camera Using the Panasonic "IP Setting Software204
22 About the Displayed System Log206
- Error Indications Relating to Ntp208
23 Troubleshooting210
24 Directory Structure of Drive B221

Panasonic WV-SF438 - Page 178

Table of Contents

Other manuals for Panasonic WV-SF438

Related product manuals