Panasonic WV-SFN310 - Standard Accessories; Monitor Out Conversion Plug

27
Important Information (this document) .................1 pc.
Installation Guide .................................................1 set
Warranty card ......................................................1 set
CD-ROM*
1
..........................................................1 pc.
Code label*
2
........................................................1 pc.
The following parts are used during installation procedures.
SF V 311
SF V 310
Base bracket .......................................................1 pc.
Attachment plate .................................................1 pc.
Fixing screws for attachment plate
(M4 x 8 mm) .....................5 pcs. (of them, 1 for spare)
Template A (for the attachment plate) ............. 1 sheet.
Template B (for the base bracket) ................... 1 sheet.
Waterproof tape ...................................................1 pc.
Bit .......................................................................1 pc.
4P alarm cable ....................................................1 pc.
2P power cable ...................................................1 pc.
MONITOR OUT conversion plug ..........................1 pc.
LAN cable cover ..................................................1 pc.
SF R 311
SF R 310
SF N311
SF N310
Attachment plate .................................................1 pc.
Template A (for the attachment plate) .............. 1 sheet.
Bit .......................................................................1 pc.
MONITOR OUT conversion plug ..........................1 pc.
Cable tie .......................................2 pcs. (incl. 1 spare)
External I/O terminal plug*
3
..................................1 pc.
Power cord plug*
3
...............................................1 pc.
*1 The CD-ROM contains the operating instructions and different kinds of tool software programs.
*2 This label may be required for network management. The network administrator shall retain the
code label.
*3 The external I/O terminal plug and power cord plug are attached to the camera.
Standard accessories