20
■Using the mount bracket (accessory)
When conduits are used for wiring, or when there is no
space available for wiring in the ceiling or the wall, the
mount bracket is used.
Note:
• Use the template (accessory) with the side with the
arrow facing you.
• Ceiling installation:
Place the template so that the arrow is pointing to the
front of the camera (the lens side).
• Wall installation:
Place the template so that the arrow is pointing down.
<Connecting the cable through holes opened in the ceiling or wall>
Place the template (accessory) on the ceiling or wall, mark the hole for the cable to be passed
through and for the fixing screws (3 places), then open the holes.
IMPORTANT:
• The camera supports pipe attachments (locally procured) for 3/4 inch ANSI NPSM (parallel
pipe threads) as well as G3/4 of ISO 228-1. Open the cable access hole according to the pipe
attachment.
<Connecting the cable through the side cable access hole>
Place the template (accessory) on the ceiling or wall, mark the holes for the fixing screws (3 places),
then open the holes.
Fixing screw
hole
Cable
access hole
■
Ceiling
■
Wall
Arrow
Template
To Next Page
Loading...
