Images will be displayed clearly even at night since the camera will be automatically switched from
the color mode to the black and white mode under low illumination condition.
Important:
• The operatingsound mightbe heardduringthemode change, however it does notindicate
any malfunction.
Power over Ethernet function
When connecting with a PoE (Power over Ethernet) device, power will be supplied by simply con-
necting a LAN cable. (IEEE802.3af compliant)
Interactive communication with audio
By using the audio output connector and the microphone in connector, receiving audio from the
camera on a PC and transmitting audio from the PC to the camera is available.
SDHC/SD memory card slot equipped
It is possible to save H.264 videos and JPEG images on the SDHC/SD memory card manually at
an alarm occurrence or on a web browser.
It is also possible to save JPEG images at a network failure occurrence. (Download is possible.)
* Recommended SDHC/SD memory card (☞ page 34)
About the user manuals
There are 2 sets of operating instructions for the WV-SP306, WV-SP305, WV-SP302 (NTSC model),
WV-SP306E, WV-SP305E, WV-SP302E (PAL model) as follows.
• InstallationGuide:Explainshowtoinstallandconnectdevices.
• Operating Instructions (PDF): Explains how to perform the settings and how to operate this
camera.
Adobe
®
Reader
®
is required to read these operating instructions (PDF) on the provided CD-ROM.
When the Adobe
®
Reader
®
is not installed on the PC, download the latest Adobe
®
Reader
®
from
the Adobe web site and install it.
"WV-SP306, WV-SP305, WV-SP302" or "SP306, SP305, SP302" shown in the instructions and
illustrations used in these operating instructions indicate the WV-SP306, WV-SP305, WV-SP302,
WV-SP306E, WV-SP305E, WV-SP302E.
The screens used in these operating instructions show the case of NTSC model.