Panasonic WV-SP306

31
When using DC power supply
•Is12VDCpowersupplyconnectedto
the power supply terminal?
→ Check whether the connection is
appropriately established.
•IstheACadaptorinusecompliantwith
the Specifications?
→ Check the Specifications regarding
AC adaptor.
When using a PoE device for power
supply
•ArethePoEdeviceandthenetwork
connector on the rear of the camera
connected using a LAN cable (4-pair)?
→ Check whether the connection is
appropriately established.
•DependingonthePoEdevice,thepower
supply will stop when the demanded
power exceeds its total power limit for all
PoE ports.
→ Refer to the operating instructions of
the PoE device in use.
26 - 27
Cause/solution
Troubleshooting
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the
table or a problem is not described below.
Power is not turned on.
Reference
pages
Symptom